Powerware 9135 Two-in-One UPS 5000/6000 VA - Manual (Page 31)

INSTALLATION
EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide S 164201726 Rev 1
www.powerware.com
25
2. Recommended. Remove the UPS battery tray (see Figure 5):
S
Remove the UPS front cover (six screws).
NOTE A ribbon cable connects the control panel to the UPS. Do not pull on the cable or
disconnect it.
S
Place the front panel above the UPS.
S
Remove the two battery retaining brackets (four screws).
S
Slightly pull the battery tray, then lift it to extract it.
Figure 5. Removing the Battery Tray