Powerware 9135 Two-in-One UPS 5000/6000 VA - Manual (Page 29)

INSTALLATION
EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide S 164201726 Rev 1
www.powerware.com
23
UPS Setup
The Powerware 9135 UPS is designed for flexible configurations and can
be installed in a rack or as a standalone cabinet.
If you are installing the UPS in a rack, continue to the following section,
Rackmount Setup;" otherwise, continue to Tower Setup" on page 30.
Rackmount Setup
The rail kit can be mounted in 19-inch panel (48 cm) racks from 24 to
30 inches (61 to 76 cm) deep and includes:
S
Left and right sliding rail assemblies
S
(20) M4 6 mm Phillips
® flat−head screws
S
(4) M4 10 mm Phillips round−head screws
S
(4) M6 12 mm Phillips round−head screws
S
(8) M6 12 mm Phillips flat−head screws
S
(2) mounting brackets
S
(2) rear hold−down brackets