Pentax Optio M50 - Manual (Page 97)

95
4
Tak
ing Pi
cture
s
5
Press the 4 button.
The White Balance setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
Refer to “Manual Setting” below for instructions on adjusting the white
balance manually.
Have a blank sheet of white paper or similar material ready.
1
In the White balance screen, use the four-way controller
(23) to select K (Manual).
2
Point the camera at the blank
sheet of paper or other material so
that it fills the frame displayed in
the center of the screen.
3
Press the shutter release button
fully.
The white balance is automatically adjusted.
4
Press the 4 button.
The setting is saved and the screen returns to the [A Rec.Mode].
5
Press the 3 button.
The camera returns to capture status.
If you use the [White Balance] function frequently, you can save time
by assigning it to the Green button. (p.58)
Saving the White Balance 1p.106
Manual Setting
MENU
A d j u s t SHUTTER
W h i t e B a l a n c e
C a n c e l C a n c e l O K O K O K C a n c e l OK