Pentax Optio M50 - Manual (Page 124)

122
5
Pla
y
in
g Bac
k
an
d Del
e
ting
Ima
g
es
For correcting the camera shake in recorded images.
1
Enter the Q mode and use the four-way controller (45)
to choose the image to correct camera shake for.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller (2345) to select P
(Digital SR).
4
Press the 4 button.
The image to correct is displayed.
5
Press the 4 button.
6
Use the four-way controller (23)
to select [Overwrite] or [Save as].
If the image is protected, you can only
select [Save as].
7
Press the 4 button.
The corrected image is saved in the built-in
memory or SD Memory Card.
Correcting Camera Shake with Digital SR
• If you overwrite the image, the shake information is lost, and you
cannot perform shake correction again.
• P appears on the upper left of the display only when playing back
images for which camera shake can be corrected. However, camera
shake may not be corrected when the camera shake is too extreme.
In such cases, the error message will appear in step 5.
Digital SR Digital SR Digital SR
OK OK OK OK MENU Cancel Cancel Cancel
Four-way controller
4 button
Zoom/f/y
button
Green button
Q Button
Executes shake reduction Executes shake reduction
processing on this image processing on this image
Executes shake reduction
processing on this image
OK OK OK OK MENU Cancel Cancel Cancel
1 0 0 - 0 0 0 1 1 0 0 - 0 0 0 1 1 0 0 - 0 0 0 1
Overwrite
Save as
Cancel
Overwrite Overwrite
original image? original image?
Overwrite
original image?
OK OK OK OK