Pentax Optio M50 - Manual (Page 94)

92
4
Tak
ing Pi
cture
s
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the number of recorded
pixels.
5
Press the 4 button.
The Recorded Pixels setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
• When drive mode is set to Y (Frame Composite), the number of
recorded pixels is fixed at h.
• The number of recorded pixels for images captured in S (Digital
Wide) or 4 (Digital SR) mode is fixed at f. (However, the
number of recorded pixels will be h if you exit the Digital Wide
mode without taking second picture.)
• If you take and save only the first frame in F (Digital Panorama)
mode, the number of recorded pixels fixed at i.
• If you use the [Recorded Pixels] function frequently, you can save
time by assigning it to the Green button. (p.58)
Recorded Pixels and Quality Level of Still Pictures 1p.31
5 M
4 M
3 M
2 M
1024
640
8 M
Storage Capacity
MENU Cancel Cancel Cancel OK
12
Recorded Pixels
Quality Level
White Balance
AE Metering
Sensitivity
Focusing Area
OK