Pentax Optio M50 - Manual (Page 86)

84
4
Tak
ing Pi
cture
s
You can adjust the overall brightness of the picture.
Use this function to take pictures that are intentionally overexposed or
underexposed.
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23)
to select [EV Compensation].
3
Use the four-way controller (45) to
select the EV value.
The selected EV value is saved.
To brighten, select a positive (+) value. To darken, select a negative
(–) value.
You can choose the EV setting in the range of –2.0 EV to +2.0 EV in
1/3 EV steps.
4
Press the 3 button.
The setting is complete and the camera returns to capture status.
Setting the Exposure (EV Compensation)
• If you use the EV compensation function frequently, you can save
time by assigning it to the Green button. (p.58)
• When the histogram is displayed, bright portions and dark portions are
indicated on the display, enabling you to check the exposure. (p.86)
• The EV compensation function cannot be used in b (Auto Picture)
or 9 (Green) mode.
Saving the EV Compensation Value 1p.106
Rec.Mode
MENU
1 / 3
Recorded Pixels
Quality Level
White Balance
AE Metering
Sensitivity
AWB
Auto
Focusing Area
8 M
Exit
MENU
Four-way controller
3 button
Rec.Mode
1sec
Digital Wide
Instant Review
Memory
MENU
2 / 3
Movie
Digital Zoom
EV Compensation 0.0
Exit