Editing the network configuration, Restarting the vmc 1000 appliance, Next steps – Polycom Video Media Center VMC 1000 User Manual
Page 23
Licensing the VMC 1000 Appliance
Polycom, Inc.
19
Editing the Network Configuration
Use the Network Configuration link to replace the default static IP values
originally entered for the appliance with the ones that you want to assign to
the appliance.
To edit the network configuration:
1
From the VMC Initialization & Licensing menu, click the Network
Configuration link.
2
Enter the IP Address.
3
Enter the Subnet Mask.
4
Enter the Default Gateway.
5
Enter the DNS Servers.
If you have more than one DNS server, separate each one using a comma
delimiter.
6
Click Save and Reboot.
7
Remove the cross over cable from the VMC 1000 and connect the VMC
1000 to your corporate network.
Restarting the VMC 1000 Appliance
To complete the licensing process, you must restart the VMC 1000.
To restart the VMC 1000 appliance:
1
From the VMC Initialization & Licensing menu, click System Status.
2
Click the Restart Server button.
Next Steps
After you have completed the licensing process, please proceed to the next
chapter,
“Configuring the VMC 1000 Appliance”
on page 21, to finish
configuring the VMC 1000 appliance.
NOTE: Reset your PC back to its original settings.