Uploading the permanent vmc 1000 license file, Setting up the network connection – Polycom Video Media Center VMC 1000 User Manual
Page 22
Video Media Center - VMC 1000 Getting Started Guide
18
Polycom, Inc.
Uploading the Permanent VMC 1000 License File
To complete the licensing process for the VMC 1000, you must upload the
permanent VMC 1000 license file.
To upload the permanent VMC 1000 license file:
1
From the VMC Initialization & Licensing menu, click License
Management.
2
Click the Browse button to navigate to the directory on the PC where the
VMC 1000 license file is located and select the file.
3
Click the Upload License button.
Setting Up the Network Connection
1
From the PC, go to Start>Control Panel>Network Connections.
2
Right click Local Area Connections and select Properties.
3
Scroll down to the Internet Protocol (TCP/IP) option and highlight it.
4
Click Properties.
5
Click the Use the following IP address button.
6
Enter the following default IP address values:
a
IP address: 192.168.1.10
b
subnet mask: 255.255.255.0
c
Default gateway: 192.168.1.1
7
Click OK.
NOTE: Make sure you write down your network settings before you change them if
you are using a static IP address.
NOTE: You are not able to ping the VMC 1000 appliance.