Connecting your treo to your computer – Palm Treo 600 User Manual

Page 31

Text mode
Original mode

Setting up your computer :: 29

Connecting your Treo to your computer

1. Plug the AC charger into a wall outlet. If necessary connect an adapter.
2. Connect the charger to the short end of the HotSync cable. Be sure to match the

sides of the connectors labeled UP.

3. Plug the USB HotSync cable into an available USB port on your computer.
4. Connect the long end of the HotSync cable to the bottom of your Treo with the

button facing up.

For best performance, plug
your USB synchronization
cable directly into a USB
port on your computer. If
you use a USB hub, make
sure it is a powered hub.

A. USB cable
B. HotSync button