Paxar Monarch TCMPCL2PR - Manual (Page 27)

Defining the System Setup Packet –––––––––––––––––––––––––––––
Use the system setup packet (A) to select the power up mode,
display language, print separators between batches, print a
"slashed zero," and select the symbol set.
Syntax {I,A,powup_mode,language,sep_on,slash_zero
symbol_set
p}
A1. A System Setup Packet
A2. powup_mode Online Mode. Options:
0 online mode
1 offline mode (9494/9446/1460)
A3. language Display Language. Options:
0 English
1 French (9446/1460)
2 German (9446/1460)
3 Spanish (9446/1460)
A4. sep_on Batch Separators. Options:
0 Does not print a separator.
1 Prints a separator (9494/9490/9446)
A5. slash_zero Slash Zero. Options:
0 Print a standard zero
1 Print a zero with a slash through it.
NOTE: The scalable font does not print a slashed zero.
A6. symbol_set Symbol Set. Options:
0 Internal/ Monarch
1 ANSI
2 Code Page 437
3 Code Page 850
NOTE: The CG Triumvirate fonts and Font #50 support
only the ANSI and DOS Code 437 and 850 Page
Symbol Sets. See Appendix C, "Symbol
Sets/Code Pages" for more information.
See "Defaults" for the default values on each printer.
Example {I,A,0,0,1,1,0
p }
Powers up the printer in the online mode, displays prompts in
English, prints a separator after each batch, prints zeros with
slashes through them, and uses the internal symbol set.
Chapter 3. Configuring the Printer
3-7