Paxar Monarch TCMPCL2PR - Manual (Page 131)

Error
Code Description
267 Baud rate selection must be 0 (1200), 1 (2400), 2
(4800), 3 (9600) or 4 (19200). Resend the
communication settings packet.
268 Word length selection must be 0 (7 bits), or 1 (8
bits). Resend the communication settings packet.
269 Stop bits selection must be 0 (1 bit), or 1 (2 bits).
Resend the communication settings packet.
270 Parity selection must be 0 (none), 1 (odd), or 2
(even). Resend the communication settings packet.
271 Flow control selection must be 0 (none), 1 (DTR), 2
(CTS/RTS), or 3 (XON/XOFF). Resend the
communication settings packet.
272 Internal code page selection must be 0 (Internal), 1
(ANSI), 2 (DOS 437), or 3 (DOS 850).
273 Cut adjustment must be -99 to 99 dots.
282 RS232 Trailer string is too long. Use a maximum of
3 characters. See "Defining the Control Characters
Packet" in Chapter 3 for more information.
283 ENQ Trailer string is too long. Use a maximum of 3
characters. See "Defining the Control Characters
Packet" in Chapter 3 for more information.
284 The buffer type must be T (transmit), R (receive), I
(image), F (format, batch data, and graphics), D
(downloadable fonts), V (vector/scalable fonts). See
"Defining the Memory Configuration Packet" in
Chapter 3 for more information.
Chapter 9. Errors
9-9