Palsonic DVD R 212 - Manual (Page 31)

Play Mode
30
In this section, we will introduce how to control the play process.
Most of the play process control operations can be done through the menu. The operations are as follows.
1. Enter the play control bar menu, use the arrow buttons to select
the status-play item and press the "SELECT" button.
2. Use the arrow buttons to select corresponding values according to your need, and press the "SELECT"
button. The Process Control Item has the following values. Each value corresponds with an operation.
Some discs might not contain all the values as follows.
Play,
Stop,
Pre-stop,
Pause
FFx2~FFx32( The numbers indicate the speed of fast forward play),
FBX2~FBx232 (The numbers indicate the speed of fast back play),
Slow 1/2- Slow 1/8 (The fractions indicate the speed of slow play)
Play Process Control
1. Press the button, the system will go forward to the next chapter (DVD) or the next track (VCD, etc.)
and start playing.
For DVD discs, only the forward operation within a title is allowed.
2. Press the button, and the system will play fast forward. With every press, the forward play speed will
gain. For MP3 discs, such operation is invalid.
1. Press the button of the remote controller, the system will go back to the previous chapter (DVD) or the
previous track (VCD, etc.) and start playing.
2. Press the button, and the system will play fast backward. With every press, the backward play speed
will reduce gradually.
Menu Operation
Forward Play
Back Play
Normal
Play
01/01
02/14
01/03-OTH
01/01-OTH
01/01
DVD
MODE
TRICK
TITLE
CHAPTER
AUDIO
SUBTITLE
ANGLE
T-TIME 00:02:48-00:51:25