Palsonic DVD R 212 - Manual (Page 19)

Timer Recording
18
This function enables the unit to start recording according to the preset requirement once the scheduled time
is reached. After the recording is done, the unit is in standby status. To start timer recording, set up a
recording schedule at first and configure the system according to the requirement.
If you are busy and you don't want to miss interesting
programs, the unit can satisfy your need. Before setting up
the timer recording, set the system clock first. (For
instructions, see "System Setup: System Clock Setting").
1. Press the "TIMER button to enter the timer
recording schedule setup menu, as shown in the chart to
the right.
There are 20 records in this menu. Each record
represents a recording schedule.
2. In the timer recording setup menu, use the or button to select a record, and press the "Select" button.
3. Setup the input source
In the Item Editor dialog box, use the , and "Select" buttons
to select the value of "SOURCE".
4. Set up the recording quality
In the Item Editor dialog box, use the , and "SELECT" buttons to select the quality value. For more
information about recording quality, see "Basic Information: Terms" for reference. HQ, SP, EP, SLP.
Source Quality Date Start End
Ch057 HQ 12/31/03 12:44 13:05
1
2
3
4
5
6
Record scheduler
SP DAILY 07:03 08:33 Rear CVBS W
Item Editor
Confirm Cancel
Front AV
SP
01/01/00
12:44
13:15 Source
Quality
Once
Start
End
Item Editor
Confirm Cancel
Source
Quality
Once
Start
End Front AV
SP
SLP
EP
SP
HQ