Panasonic WV-CW864 - Manual (Page 49)

50
1. Preparations
(1) Procure a ceiling mount bracket.
(2) Installation Surface
CAUTION: Consult an expert on the
load bearing capacity of the installa-
tion surface and structure. If the sur-
face is not strong enough, the cam-
era may fall down. Refer to the prod-
uct specifications for weights.
Prepare appropriate hardware (e.g. wall
nuts, anchor bolts, etc.) for fixing on the
installation surface.
2. Disassembling the Camera
(1) Remove the upper base from the cam-
era by loosening 3 screws. Turn the
upper base and separate it.
(2) Remove the attachment pipe from the
upper base by loosening 4 screws.
x3
x4
3. Mounting the Bracket
(1) Fix the bracket to the installation surface
using appropriate bolts, nuts or the like
(not supplied).
(2) Fix the attachment pipe to the bracket.
(3) Thread cables through the bracket.
Connect cables, referring to CONNEC-
TIONS.
(4) Fix the upper base to the attachment pipe
using 4 screws, and fill the gap between the
bracket and attachment pipe with waterproof
material such as silicon clay. See instruc-
tions of the bracket for details.
Attachment Pipe
Taper Pipe Threads
Cables
Upper Base
Upper Base
X4 Screws
Waterproof Material