Panasonic TQBH9003-6 - Manual (Page 18)

18
USB
DVI-D IN
REMOTE
SERIAL RGB1 IN RGB2 IN/RGB OUT
AUDIO OUT
RGB AUDIO IN VIDEO IN AUDIO IN
S-VIDEO IN
R
L
R/R-Y/P R VD SYNC/HD B/B-Y/P B
RGB3 IN
G/Y
' & ( ) % $ #
, - . +
*
# USB port
(page 21 )
The remote control unit can be
used as a personal computer
mouse by connecting the
projector to a personal computer
with the supplied USB cable.
(4-pin square connector)
$ SERIAL connector
(pages 26 , 27 and 58 )
This connector is used to connect
a personal computer to the
projector in order to externally
control the projector. (RS-232C
compatible)
% RGB1 IN connector
(pages 26 and 27 )
This connector is used to input
RGB signals and YP
B
P
R
signals.
& RGB2 IN/RGB OUT connector
(pages 26 and 27 )
This connector is used to input or
output RGB signals and YP
B
P
R
signals. Use the RGB2 SELECT
item in the OPTION menu to
select whether you want input or
output with this connector.
' DVI-D IN connector
(page 27 )
This connector is used to input
DVI-D signals.
( AUDIO OUT jack
(pages 26 and 27 )
This jack is used to output the
audio signals which are input to
the projector. If audio equipment
is connected to this jack, no
sound will be output from the
built-in speakers.
) S-VIDEO IN connector
(pages 26 and 44 )
This connector is used to input
signals from a S-VIDEO-
compatible equipment such as a
video deck. The connector is S1
signal compatible, and it
automatically switches between
16:9 and 4:3 aspect ratios in
accordance with the type of
signal being input.
* AUDIO IN L-R (for VIDEO/S-
VIDEO) jacks
(page
26 )
Only one system is provided, so
connect the appropriate
connector when using VIDEO or
S-VIDEO.
+ Remote control connector
(page 57 )
This connector is used to control
the projector from the Remote
Control set up in Wired mode.
, RGB3 (YP
B
P
R
) IN connector
(pages 26 and 27 )
This connector is used to input