Panasonic DP-180 - Manual (Page 146)

146
Setting Your Machine
Access Code
■ General Description
The Access Code prevents an unauthorized user from operating the machine. Once a 4-digit Access Code is
registered, no one can operate the machine without entering the correct access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting or
transmission, and the display returns to standby, you have to re-enter the access code in order to use the machine
again. Registering the Access Code does not affect the use of the machine in any other way.
■ Setting the Access Code
■ Operating FAX/EMAIL with the Access Code
NOTE 1. To erase the Access Code, enter the Access Code and press and follow the
procedure above to Step 3, then press , and .
2 1 3
COLOR COLOR
REMOTE REMOTE COPY COPY
FAX PARAMETER(1-183)
NO.=
❚
2a 1
COLOR COLOR
REMOTE REMOTE COPY COPY
2b
dd-MMM-yyyy 15:00
ACCESS CODE=
❚
Restrict all Operatings
Restrict the Operation of Setting/Printing
the Fax Parameters Only
(Ex: When setting the Fax Parameter.)
4-digit Access Code
Ex: 1234
SET
CLEAR SET STOP