Panasonic CF-R1 - Manual (Page 37)

37
Setup Utility
On
Off
Disable
Enable
Disable
Enable
External Monitor
Internal LCD
Simultaneous
Disable
Enable NumLock* 1
Touch Pad
Speaker
Display* 2
Display Expansion* 3
Main Menu
Model No: xxxx
Serial No: xxxx
BIOS Version: Vx.xxLxx
System Time: [xx:xx:xx]
System Date: [xx/xx/xxxx]
System Memory: xxx MB
Hard Disk: xx GB
NumLock: [Off]
Touch Pad: [Enable]
Speaker: [Enable]
Display: [External Monitor]
Display Expansion: [Disable]
( : Default)
Parameters
* 1 Does not operate for Windows.
* 2 The display destination in cases where Windows is not running is set here. If an external display is not connected, all information
will appear on the internal LCD even if [External Monitor] or [Simultaneous] is selected.
After Windows starts, the setting made in the following field is enabled.
Windows 2000
[Start] - [Settings] - [Control Panel] - [Display] - [Settings] - [Advanced] - [Lynx3DM+]
Windows XP
[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] - [Advanced] - [Lynx3DM+]
* 3 When [Display Expansion] is changed from [Enable] to [Disable], display expansion for the Windows screen is not automatically
disabled (turned off). To disable it, set the following setting to [OFF].
Windows 2000
[Start] - [Settings] - [Control Panel] - [Display] - [Settings] - [Advanced] - [Lynx3DM+] - [Stretch].
Windows XP
[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] - [Advanced] - [Lynx3DM+] - [Stretch].