Panasonic CF-R1 User Manual
Page 28
28
SD Memory Card/MultiMedia Card
Setting for this SD card
Use when starting the computer:
Add the check mark if you want to use the SD memory card instead of a password entry in order to start the
computer. (When this box is selected, a check mark is also entered automatically in [Use the SD card when
starting the computer].)
Setup Utility, enter that password. If a Supervisor Password has not been set in the Setup Utility, enter the
same password twice on this screen.
Use when logging on to Windows:
Add the check mark if you want to use the SD memory card instead of a password entry in order to log on
to Windows.
The screen for entering the user name and password appears. Enter the user name and password. You
must enter the same password twice.
The screen for entering the password appears. When you enter the password and select [OK], the follow-
ing confirmation message appears: [The user name and password registered in the SD card will be erased.
Are you sure you want to proceed?]
Select [OK] to erase the user name and password from the SD memory card.
Changing the user name and password:
You can change the Windows logon user name and password which are set in the inserted SD memory
card. The set user name appears, so enter the password. Next, enter the new user name and password.
If no SD memory card is inserted, all of the fields under [Setting for this SD card] are grayed out and
none of them can be selected.
[User name and password] is grayed out if [Use when logging on to Windows] is not selected.
After completing all the settings, select [OK]
Select [OK], then restart the computer
NOTE
5
6