Panasonic CF-R1 - Manual (Page 32)

32
Modem
1
Connecting a telephone line to the modem
It is not possible to connect the modem to any of the following lines.
Internal home phones
Intercoms
When [Modem] is set to [Disable] in the Setup Utility, the modem will not
operate. (In the default setting, [Modem] is set to [Enable].)
NOTE
CAUTION
Do not use the PBX internal phone lines inserted in company offices. Doing
so may lead to a fire or electric shock.
2
Modem
Do not enter either the standby or hibernation mode during communica-
tions.
Modem sounds such as dial tone and carrier handshaking noise cannot
be heard.
NOTE
Windows 2000
Select [Edit] in [Start] - [Settings] - [Control Panel] - [Phone
and Modem Options] - [Dialing Rules]
Windows XP
Select [Edit] in [start] - [Control Panel] - [Printers and Other
Hardware] - [Phone and Modem Options] - [Dialing Rules]
Input the necessary information (items such as the country, area code, etc.),
select [OK], then select [OK].
Connecting to a Telephone Line and Settings