Recorder connections, Notice about recorder connections, Using a recording-only and a playback-only decks – Panasonic WR-XS3P User Manual
Page 24: When recording and playing back with one deck
24
When you connect a cassette tape recorder or MD recorder to record the broadcasting, confirm the following:
■
Notice about Recorder Connections
Howling can occur depending on the connection form or connected devices. Connect the recording devices either of the fol-
lowing ways:
●
When Using a Recording-only and a
Playback-only Decks
The unit 's REC OUT will be used for the recording output
line.
• Connect the unit's REC OUT with the recording deck's
REC IN.
• Connect the unit' s STEREO INPUT or MULTI INPUT ST
jacks with the playback deck's stereo output connector.
●
When Recording and Playing Back
with One Deck
The unit' s SUB OUTPUT jack will be used for the recording
output line.
• Set the DIP switch of the assigned input line to ON.
• Connect the unit' s SUB OUTPUT and the recorder's
recording output connector with a recommended type
of cable. (Refer to p. 13 for details on cable informa-
tion.)
• Connect the unit' s STEREO INPUT, MULTI INPUT ST or
LINE IN jack(s) and the output connector of the play-
back deck.
Note:
This connection implements monaural recording, as stereo input signals are mono mixed to be output through SUB
OUTPUT jack.
■
Using a Recording-only and a Playback-only Decks
A recording-only and a playback-only decks are used.
1. Connect the playback-only deck to the STEREO INPUT 1 to 4 jacks or the MULTI INPUT ST jack.
2. Connect the recording-only deck to the REC OUT jack.
RECORDER CONNECTIONS
Recording only deck
Playback-only deck
PLAY
REC
REC OUT
STEREO INPUT 1 to 4
Ser No.
0dB is referenced to 0.775Vrms
AC IN
SIGNAL
GND
1
2
3
4
1
L
R
3
4
ST
AUTO MUTE
3
4
ST
AUTO MUTE
MONO INPUT –60dB to –10dB 10k
Ω
INPUT –10dBV 10k
Ω
STEREO
STEREO
PIN CONNECTION
MONO
INPUT
MODE
1
2
3
A
ON
OFF
ON
No. 1: GND
No. 2: HOT
No. 3: COLD
OFF
4 3 2 1 4 3 2 1
MODE
SELECT
SELECT
STEREO
MONO
SUB
MONO
ST
MULTI INPUT
SUB IN
REC OUT
–10dBV 10k
Ω
+4dB 10k
Ω
–10dBV 10k
Ω
–45dB 10k
Ω
2
3
4
L
R
L
L
R
R
OUTPUT +4dB 10k
Ω
B
YES
NO
YES
NO
You want to play back and
record the broadcasting on
the cassette tape or MD.
You do not use SUB
OUTPUT jack.
Use a recording deck and
playback deck.
Mono recording is OK.
You can record and play
back with one deck.
Use a recording deck and
playback deck.