Panasonic WR-XS3P - Manual (Page 20)

20
When using the MULTI INPUT ST jacks (or MONO connector) and LINE IN jack at the same time
In this case, the signal from the MULTI INPUT ST jacks will not be output.
The signal is mixed inside the unit and output through the assigned output connector.
Notes:
• Do not use the MULTI INPUT ST jacks and MULTI INPUT MONO connector at the same time. The MULTI IN knob is not
adjustable, as each multiple input level is different.
• Mono and stereo input signals are mixed inside the unit. When you do not want to have the mono input mixed, you need to
change the internal switch setting.
Refer to a service manual procurable in your area.
To adjust the output levels
The input signal from the MULTI INPUT ST jacks (or MULTI INPUT MONO connector) is mixed by the unit, then it is output
through the output line.
The output line is selectable with the assign button setting at the front panel.
• Adjust the output level with the STEREO OUT knob when the STEREO OUTPUT jack is assigned to the MULTI INPUT ST
jacks (or MULTI INPUT MONO connector).
• Adjust the output level with the MONO OUT knob when the MONO OUTPUT jack is assigned to the MULTI INPUT ST jacks
(or MULTI INPUT MONO connector).
• Adjust the output level with the SUB OUT knob when the SUB OUTPUT jack is assigned to the MULTI INPUT ST jacks (or
MULTI INPUT MONO connector).