Panasonic WR-XS3P - Manual (Page 12)

12
Secure the unit by 4 pieces of rack
mounting screws (M5 x 12) in the
accessories.
Where to install How to install
1. Install the unit on a rack.
Apply the screws in the accessories.
Note: Attach the four rubber feet if not installing the unit in a rack.
Cautions:
• When mounting this unit in a place where it is frequently subject to vibrations, secure its rear to the rack with reinforcing
angle steel (manufactured locally) or other materials.
• Keep the temperature in the rack below 45°C.
• Place this unit below heat-producing devices such as amplifiers if possible.
• If placing the unit below and above heat-producing devices such as amplifiers cannot be avoided, keep a distance of 1 U
or above the heat-producing devices.
• Use the rack mounting screws (nominal diameter: 5 x 12) supplied with the brackets if the mounting positions of the rack
are not tapped. If the screws are used at tapped positions of the rack, the original threads may be destroyed.
• The rack mounting screws in the accessories do not fit all types of racks. In that case, use the screws included with the
rack or buy your own screws.
■ Mounting into the Rack
● Rack
Use either one of the following racks for mounting the unit.
Standard: WU-RS71, capacity of 29 U (Panasonic)
Long: WU-RL76, capacity of 41 U (Panasonic)
EIA standard-compliant: depth 450 mm or more (other than Panasonic)
● Items to prepare
If you use a rack supplied by other than Panasonic, it may require four rack mounting screws (option) or four M5 x 12 screws.
(If you use a Panasonic rack, you can use the tapping screws supplied with the rack.)
Attach 4 rubber feet.