Pelican TH-50VX100U - Manual (Page 8)

COMPO. PC
FUNCTION
DISPLAY
PICTURE POS. /SIZE
INPUT CH VIDEO MENU
HDMI
OFF TIMER EXT.SCALER
フ
DISPLAY
MEM. LOAD
“AA” size
Close
Open
Hook
8
Accessories
Requires two AA batteries.
2. Insert batteries - note correct polarity ( + and -).
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precautions:
1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when the remote control acts sporadically or stops operating the Plasma Display.
6. Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
7. Make a note of the remote control codes before changing batteries in case the codes are reset. (see page 44)
Accessories Supplied
Check that you have the Accessories and items shown
Operating
Instruction book Remote Control
Transmitter
N2QAYB000323 Batteries for the
Remote Control
Transmitter
(2 × AA Size)
AC cord Fixing band × 1
Remote Control Batteries
Helpful Hint:
For frequent remote control users, replace old batteries with Alkaline batteries for longer life.
1. Pull and hold the hook, then open the battery cover.