Pelican TH-50VX100U - Manual (Page 37)

37
Reduces power consumption
1 Display the menu screen.
2 Select “SET UP”.
SET UP
POS. /SIZE
SOUND
PICTURE
2 OK
1 select
3 Select the item and set.
COMPONENT/RGB-IN SELECT
EXTERNAL SCALER MODE
POWER SAVE
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OFF
OFF
ON
OFF
OFF
RGB
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH (US)
SCREENSAVER
SIGNAL
2
change
1 select
4
Exit the menu.
or
COMPONENT/RGB-IN SELECT
EXTERNAL SCALER MODE
POWER SAVE
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OFF
OFF
ON
OFF
OFF
RGB
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH (US)
SCREENSAVER
SIGNAL
● POWER SAVE When this function is turned ON, luminous level of the Plasma Display is suppressed,
so power consumption is reduced.
● STANDBY SAVE When this function is turned ON, power consumption of the microcomputer is reduced
during power supply standby (see page 13, 15, 16), so standby power of the set is
reduced.
● POWER MANAGEMENT When this function is set to ON, it operates under the following conditions to turn the
power on or off automatically.
When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC IN
signal input:
→Power is turned off (standby); the power indicator lights up orange.
When pictures (HD/VD sync signals) are subsequently detected:
→Power is turned on; the power indicator lights up green.
Notes:
• This function operates only during PC IN signal input.
• This function is effective when “SYNC” is set to “AUTO” and “COMPONENT / RGB-IN
SELECT” is set to “RGB”.
● AUTO POWER OFF Equipment power supply is turned OFF when there is no signal.
When this is set to On, the power supply of the unit goes Off 10 minutes after the input
signals stop.
Note:
• This function is effective for input signals except PC IN terminal.