Pelican TH-50VX100U - Manual (Page 35)

35
1 Select “SIDE BAR ADJUST”.
2 Adjust the menu.
OFF
OFF
BRIGHT SIDE BAR ADJUST
SCREENSAVER
START
WOBBLING
PEAK LIMIT
FUNCTION NEGATIVE IMAGE
2 change
1 select
OFF DARK MID BRIGHT
3 Exit from SCREENSAVER.
or
These functions prevent the occurrence of an “image retention” on the display when turned ON.
WOBBLING: Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of
sharper contour of image.
ON1: Shifts the image every 30 seconds.
ON2: Shifts the image at a dot level pitch depending on screen-detection.
PEAK LIMIT: Suppresses image contrast (peak brightness).
Note: When a still picture is viewed for an extended time, the screen may become slightly darker. (see page 45)
Reduces screen image retention
SIDE BAR ADJUST
Do not display a picture in 4:3 mode for an extended period,
as this can cause an image retention to remain on the side
bars on either side of the display field.
To reduce the risk of such an image retention, illuminate the
side bars.
This function may be applicable to the non-picture area.
Notes:
To reduce the occurrence of image retention, set the “SIDE BAR ADJUST” to “BRIGHT”.
The side bar may flash (alternate black/white) depending on the picture being shown on the screen. Using Cinema
mode will reduce such flashing. •
•
Side bars
4:3 mode
Image
retention
SCREENSAVER (For preventing image retention)
1 Select “WOBBLING” or “PEAK LIMIT”.
2 Select “ON1”, “ON2” or “OFF”
(WOBBLING).
Select “ON” or “OFF” (PEAK
LIMIT).
OFF
OFF
BRIGHT SIDE BAR ADJUST
SCREENSAVER
START
WOBBLING
PEAK LIMIT
FUNCTION NEGATIVE IMAGE
2
change
1 select