Power on / off – Pelican TH-50VX100U User Manual

Page 13

HDMI

INPUT

FULL

English (UK)

Deutsch

Français

Italiano

ENGLISH (US)

Русский

OSD LANGUAGE

Español

Power
Indicator

Remote Control
Sensor

Power ON / OFF

Connecting the AC cord plug to the Plasma Display.

Fix the AC cord plug securely to the Plasma Display
with the clamper. (see page 9)

Connecting the plug to the Wall Outlet.

Note:
When disconnecting the AC cord, be absolutely sure to
disconnect the AC cord plug at the socket outlet first.

Press the Power switch on the Plasma Display to
turn the set on: Power-On.

Power Indicator: Green

Press the

button on the remote control to turn the Plasma Display off.

Power Indicator: Red (standby)

Press the

button on the remote control to turn the Plasma Display on.

Power Indicator: Green

Turn the power to the Plasma Display off by pressing the

switch on the unit, when the

Plasma Display is on or in standby mode.

Note:
During operation of the power management function, the power indicator turns orange in the power off state.

From the second time
on, the below screen is
displayed for a while (setting
condition is an example).

Notes:

Once the language is set, this screen won’t be displayed when switching on the unit next time.
After the setting, language selection can be done from the SET UP menu. (see page 14)

•
•

When first switching on the unit

Following screen will be displayed when the unit is
turned on for the first time.
Select the language with the remote control. Unit
buttons are invalid.

Select the language.

Set.