Polycom DOC2230A - Manual (Page 51)

Chapter 3 - Initial System Configuration
3-27
c. Click OK.
The system returns to the Settings dialog box, displaying the added
static route.
Defining Quality of Service
7. To define Quality of Service parameters:
a. Click the Quality of Service button.
The QoS of Ethernet Service dialog box opens.
b. Define the following fields:
Type Select the type of router connection:
Network – defines a connection to a router segment
in another network.
Host – defines a direct connection to an endpoint
found on another network.
Table 3-8: Add Router Options (Continued)
Field Description
Table 3-9: QoS of Ethern et Service Options
Field Description
Enable Select the Enable check box to implement QoS for
IP packets.
When cleared, QoS is not implemented.