Polycom DOC2230A - Manual (Page 35)

Chapter 3 - Initial System Configuration
3-11
6. In the Settings dialog box, define the following parameters:
7. Click Next.
The PRI Settings dialog box opens.
Table 3-1: Settings Dialog Box Options
Field Description
Net Service Name Enter a unique name using up to 20 characters to
identify the Network Service. The Service
Provider’s name can be used.
Span Type Select the span type from the drop-down list; select
either T1 (usually in the U.S.), or E1 (usually in
Europe).
Service Type Select PRI (Primary Rate Interface) for all ISDN
lines that are not leased lines. To define ISDN
Leased Lines service, refer to the MGC
Administrator’s Guide, Chapter 3.
NFAS To define an ISDN NFAS Service, refer to the MGC
Administrator’s Guide, Chapter 3.