PACKARD BELL TM87 User Manual

Page 74

Text mode
Original mode

Chapter 3

NOTE: Avoid pulling on cables directly to prevent damage to the connectors.
NOTE: Use the pull-tabs on FFCs whenever available to prevent damage.

4. Release the locking latch on A and disconnect the

cable.

5. Pull the cable off the adhesive as shown.

6. Release the locking latch on B and remove the cable as shown.

7. Release the locking latch on C and remove the

cable as shown.

8. Release the locking latch on D and remove the

cable as shown.

This manual is related to the following products:

TM89 TM86