PACKARD BELL TM87 - Manual (Page 43)

Chapter 2 33
DOS Flash Utility
Perform the following steps to use the DOS Flash Utility:
1. Press F2 during boot to enter the Setup Menu.
2. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move
USB HDD to position 1.
3. Execute the BIOS.BAT batch file to update BIOS.
The flash process begins as shown.
Item Specific Help
Use < > or < > to select
a device, then press
to move it down the
list, or to move
it up the list. Press
to escape the menu
F1
ESC
Help
Exit
Select Item
Select Menu
Change Values
Select SubMenu Enter
F9
F10
Setup Default
Save and Exit
Boot priority order:
1. IDE0 : TOSHIBA MK3265GSX
2. IDE1 : TSSTcorp CDDVDW TS-L633C
3. USB FDD :
4. Network Boot : LEGACY PCI DEVICE
5. USB HDD :
6. USB CDROM :
Boot priority order:
1. IDE0 : TOSHIBA MK3265GSX
2. IDE1 : TSSTcorp CDDVDW TS-L633C
3. USB FDD :
4. Network Boot : LEGACY PCI DEVICE
5. USB HDD :
6. USB CDROM :
F5/F6
InsydeH20 Setup Utility Rev. 3.5
Information Main Boot Exit Security