Panasonic DBS 824 - Manual (Page 78)

Attendant Features Headset Operation
Revised April 2000 DBS 824-3.0/3.2-700 2-13
Headset Operation
(CPC-S and CPC-M)
Description
A headset can be connected to attendant or non-attendant phones. (Dial tone
is normally turned off when the headset is connected.)
Operation
To use a headset:
1. Connect a headset to the telephone.
2. Press the ON/OFF key.
3. Press “#51.”
The ON/OFF LED remains lit.
To stop using a headset:
Repeat the preceding steps.
Hardware Requirements
• Headsets are not provided with the DBS 824; they must be purchased
separately.
• Most commercially available headsets (with ECM mike transducers) can
be used.