Panasonic DBS 824 - Manual (Page 140)

Key Telephone Features Line Appearances
Revised April 2000 DBS 824-3.0/3.2-700 3-53
Multi-Line (ML) Appearances
(CPC-S and CPC-M)
Description
You can make and receive both CO line calls and Intercom Calls using a
Multi-Line (ML) key.
See “ML/MCO Separation” (page 3-54) for information on assigning both
ML and MCO keys to the same system.
Operation
Related Programming
• FF1 (System): Least Cost Routing (LCR) Access
• FF2 (Trunks): Pooled Trunk Access for Group “9”
• FF2 (Trunks): Pooled Trunk Access for Group “81-86”
• FF3 (Extension): Forced Least Cost Routing
• FF5 (Keys): FF Key Assignment (all)
• FF8 (LCR): LCR Settings (all)
Considerations
• A Multi-Line key will ring for incoming CO calls, Intercom Calls, recall
calls, and call-forward calls.
• When a CO call or an Intercom Call arrives, a search begins for a Multi-
Line key not in use. The lower numbered FF keys will be searched first.
When a free Multi-Line key is found, the LED flashes green and the
extension rings.
Operation Action
To originate an intercom or trunk call Press an idle MCO key. The key blinks
(green) as the call is made.
To place a call on Exclusive Hold (page 3-29) Press the MCO key.
To place a call on System Hold (page 3-15) Press the HOLD key.
To transfer a call Press HOLD, dial the destination exten-
sion, then press PROG.