Panasonic DBS 824 - Manual (Page 113)

Call Waiting Key Telephone Features
3-26 DBS 824-3.0/3.2-700 Revised April 2000
Users can also respond to call waiting by sending a text message. See “Call
Waiting/OHVA Text Reply” on page 3-28.
Operation
To set Call Waiting:
1. Press the ON/OFF key.
2. Dial the extension number.
The phone issues busy tone.
3. Press “3.”
• The EXT LED flashes.
• “Call Wait XXX” (where “XXX” is the extension) appears on the
display.
4. If you want to send a text message, dial the desired message code (5-9).
The corresponding message displays on the called party’s phone. (If the
called party does not have a display, the party continues to hear a call
waiting signal.)
5. Remain on the line until the called party picks up.
To answer Call Waiting:
1. The EXT LED flashes, indicating Call Waiting has been sent.
“Call Wait XXX” (where “XXX” is the extension number) appears on the
display.
2. Replace the handset.
• The current call is disconnected.
• “Call Wait-XXX” appears on the display.
3. Pick up the handset.
• You are automatically connected to the extension sending the Call
Waiting.
• “Talk-EXT XXX” appears on the display.