Panasonic DBS 824 - Manual (Page 182)

DSLT Features Call ParkCall
Revised April 2000 DBS 824-3.0/3.2-700 4-11
Operation
To park a call:
1. Press the HOLD key.
2. Dial “75.”
To retrieve a parked call:
1. Lift the handset.
The phone issues intercom dial tone.
2. Dial “76.”
3. Dial the number of the extension that parked the call.
Related Programming
• FF1 (System): Attendant Park Hold Recall Timer
• FF1 (System): Extension Park Hold Recall Timer
Considerations
• An alarm tone is issued if a parked call is not released before the Park
Recall Timer expires. If this happens, the user that parked the call can
retrieve it by picking up the handset. If no one retrieves the call after the
Park Recall Timer expires, a second alarm is issued at the attendant
phone(s).
• You cannot park more than one outside line at a time.
• The Call Park Recall Timer is similar to the Recall Timer, except that when
the Call Park Recall Timer is set for “0” a call automatically recalls in three
minutes.