Panasonic DBS 824 - Manual (Page 170)

Key Telephone Features Trunk-to-Trunk Transfer
Revised April 2000 DBS 824-3.0/3.2-700 3-83
• “Talk #XX” (where “XX” is the selected line number) appears on the
display.
3. Dial the telephone number of the party you want to connect to your
original call.
4. After the call goes through, press the CONF key.
• A three-party Conference Call is initiated.
• “Conf #XX #YY” (where “XX” is the first line and “YY” the second
line) appears on the display.
5. Press one of the CO keys.
• The two outside lines are connected.
• “Hold #XX #YY” (where “XX” is the first line and “YY” the second
line) appears on the display.
Related Programming
• FF1 (System): Unsupervised Conference Timer
• FF2 (Trunks): Supervised Trunk Line Conference
• FF3 (Extensions): Unsupervised Conference
Considerations
• After the Trunk-to-Trunk Transfer is completed, you cannot add another
party to create a three-party Conference Call.
• When the call is finished, the conference information disappears from the
display and your extension returns to normal operation.
• When the Unsupervised Conference Timer expires, the call is
automatically disconnected.