Panasonic DBS 824 - Manual (Page 68)

Attendant Features Attendant Assignment of Speed Dialing
Revised April 2000 DBS 824-3.0/3.2-700 2-3
Attendant Assignment of Speed Dialing
(CPC-S and CPC-M)
Description
The attendant can assign system speed dialing numbers. System speed dialing
numbers are shared by all DBS 824 extensions.
Operation
1. Press the ON/OFF key.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
2. Press the PROG key.
“F” appears on the display.
3. Press AUTO.
“FA” appears on the display.
4. Enter the Speed Dial code (00-89 or 000-199).
“Enter SSD XX” appears on the display (where “XX” is the System
Speed Dial code).
5. Dial the telephone number to be stored.
The number appears on the display.
6. Press the HOLD key.
“SSD XX” (where “XX” is the Speed Dial code) and the stored telephone
number appear on the display.
7. Repeat steps 2-6 to store additional numbers.
Considerations
• Storing a new number erases any previously stored data.
• To delete a System Speed Dial number, perform the programming steps,
but do not enter a number before pressing HOLD.