Panasonic DBS 824 - Manual (Page 151)

One-Touch Keys Key Telephone Features
3-64 DBS 824-3.0/3.2-700 Revised April 2000
To assign access codes to a One-Touch key:
1. Press the ON/OFF key.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
2. Press the PROG key.
3. Press the One-Touch key to be programmed.
4. Enter the access number.
5. Press the REDIAL key.
This inserts a pause between the access code and the telephone number.
6. Press the HOLD key.
7. Press the ON/OFF key.
The ON/OFF LED goes off.
To check a programmed One-Touch key:
1. Press the ON/OFF key.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
2. Press the CONF key.
“C” appears in the display.
3. Press the One Touch key to be checked.
The programmed data appears on the display.
4. Press the ON/OFF key.
• The ON/OFF LED goes off.
• The date and time appears on the display.
Considerations
• If the pause following an access code is too short, press the REDIAL key
more than once.