Panasonic VP-31GN - Manual (Page 24)

24
Settings Using the On-Screen Display
Press [ 34] to select the item and press [2 1] to change the
setting.
¬ To exit the settings screen
Press [MENU] twice.
OPTION
0
SLOW/SEARCH
NAVI TOP MENU MENU
RETURN
PROG/CHECK PROG PLAY
DISPLAY
JET REW TIMER
ENTER
PLAY
LIST
INDEX/SKIP
AV
DIRECT
NAVIGATOR
CANCEL/RESET ANGLE/PAGE
INPUT SELECT
MUSIC w/ PICTURE
PICTURE SPEED
AUDIO
POSITION MEMORY
SETUP ZOOM REPEAT PLAY MODE
A.SRD CINEMA
SUBTITLE
-/- -
MENU
AUDIO
ENTER
CANCEL/
RESET
DISPLAY
OPTION 1/2
TAPE SELECT [AUTO]
NTSC INPUT SELECT [AUTO]
NTSC PB SELECT [onPALTV]
JET NAVIGATOR [OFF]
DELETE NAVIDATA [NO]
OSD REC [OFF]
OSD [AUTO]
OUT[VHS/DVD] [AUTO]
END :MENU SELECT:
OPTION 2/2
DUBBING NORMAL AUDIO [L]
END :MENU SELECT:
Items Settings (Underlined items are the initial setting.)
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time (
lpage 25).
AUTO: E30, E60, E90, E120, E180 and E240 tapes
E195: E195 tapes
E260: E260 tapes
E300: E300 tapes
NTSC INPUT SELECT
Select the colour TV system used to record NTSC signals. AUTO: NTSC [4.43] and [3.58] signals
≥If the tape has not recorded correctly, select 4.43 or 3.58.
4.43:
NTSC 4.43 signals
3.58: NTSC 3.58 signals
≥Some programmes on NTSC 3.58 system cannot be recorded
correctly at this position.
NTSC PB SELECT
Select the colour TV system of the TV used to play back a tape
recording NTSC signals. on PAL TV: TVs that can receive PAL signals
4.43:
TVs that can receive NTSC 4.43 signals
3.58: TVs that can receive NTSC 3.58 signals
JET NAVIGATOR ( lpage 20) ON: Jet Navigator data automatically registered.
OFF: Data not registered.
≥If you select “ON”, “OSD REC” is set to “OFF” automatically.
DELETE NAVIDATA
See page 20 to delete data on a single tape. NO
ENTER:
If you choose this position, press [ENTER] to delete
all the Jet Navigator data.
OSD REC
You can record the present date and time on the same screen
which the picture is recorded. ON
OFF
≥If you select “ON”, “JET NAVIGATOR” is set to “OFF”
automatically.
OSD ( lpage 25) AUTO: Messages appear on the TV for about 5 seconds
when you press [DISPLAY].
OFF: Messages do not appear.
OUT [VHS/DVD] ( lpage 12)
You can set the unit so that the output is automatically switched to
the device which starts playback.
VHS: Only VHS outputs.
MANUAL: VHS output and DVD output are manually switched.
AUTO:
VHS and DVD are automatically switched depending
on the manipulation or the unit operation.
DUBBING NORMAL AUDIO ( lpage 42)
Select the audio channel to be recorded on the Normal audio track
when dubbing a bilingual DVD.
L: To record the sound from left channel
R: To record the sound from right channel
VP31GCGCS.book 24 ページ ２ ０ ０ ３ 年 ７ 月 ３ ０ 日 水曜日 午後 ８ 時 ２ ８ 分