Start reco, Operations, Recording – Panasonic VP-31GN User Manual
Page 17: 1] press [ 1 ](play), 2] press [ ; / d ], then press [rec, 3] start play on the other equipment, 4] press [ ; / d ] to start recording, 2] press [tape refresh] for 5 seconds or more, 3] press [tape refresh] for 2 seconds or more, One-touch recording (otr)
VHS
Operations
17
Recording
You can start recording quickly and set a duration.
..............................................................................................................................................................................................................................................................................................................................
During recording, press [
¥REC/OTR] on the unit repeatedly.
Select the desired recording duration.
≥Each time you press the button, the indication on the unit’s display changes as follows:
Counter display (normal recording mode)
>OFF 30 (min.)>OFF 60 (min.)>OFF 90 (min.)>
OFF 120 (min.)
>OFF 180 (min.)>OFF 240 (min.)>Current time (normal recording mode)
≥The unit will automatically switch off when OTR is completed.
¬ To stop OTR at any time
Press [
∫] or [Í/I] (VHSÍ).
Notes:
≥The OTR function works during normal recording only.
≥When the tape reaches its end during OTR, the unit will turn itself off.
You can record from other video sources (VHS, camera, etc.).
≥Connect the other equipment to this unit as shown. If audio output on the other equipment is
monaural, use a stereo-monaural conversion cable (not supplied).
≥Insert a recorded cassette tape with an intact erasure prevention tab.
≥Set A1 or A2 with [INPUT SELECT] to select the audio/video source required.
..............................................................................................................................................................................................................................................................................................................................
[1] Press [
1](PLAY).
Find the recording start point.
..............................................................................................................................................................................................................................................................................................................................
[2] Press [
;/D], then press [REC¥].
Put the unit in the recording standby mode.
..............................................................................................................................................................................................................................................................................................................................
[3] Start play on the other equipment.
..............................................................................................................................................................................................................................................................................................................................
[4] Press
[;/D] to start recording.
¬ To stop recording
Press [
∫].
You can delete all contents in a cassette’s (the picture, the sound and the Jet Navigator data).
..............................................................................................................................................................................................................................................................................................................................
[1] Insert a cassette that you want to delete the cassette’s
contents.
..............................................................................................................................................................................................................................................................................................................................
[2] Press [TAPE REFRESH] for 5 seconds or more.
The unit puts on tape refresh standby.
..............................................................................................................................................................................................................................................................................................................................
[3] Press [TAPE REFRESH] for 2 seconds or more.
The tape refresh function starts.
≥The tape is rewound to the beginning, and it is fast-forwarded with erasing the tape.
≥When the tape reaches the end, this unit automatically rewinds it to the beginning.
Note:
≥When a video cassette with a broken erasure prevention tab is inserted, this function is not
activated.
One-Touch Recording (OTR)
REC/OTR
REW
FF
PULL-OPEN
/
I
EJECT
TIMER REC
TAPE REFRESH
AV2 IN
REC/OTR
CH
VIDEO
AUDIO
L
R
Recording from an external source
AUDIO
OUT
L
R
VIDEO
OUT
PULL-OPEN
TIMER REC
TAPE REFRESH
AV2 IN
REC/OTR
CH
VIDEO
AUDIO
L
R
R-AUDIO-L
VIDEO
R-AUDIO-L
VIDEO
VHS/DVD
OUT
AV1 IN
AV2 IN (AUDIO/VIDEO)
AV1 IN (AUDIO/VIDEO)
Other VHS or Video
movie camera
(Not supplied)
Tape Refresh Function
ª For recordings while “JET NAVIGATOR” is set to “ON”
Be sure to set “JET NAVIGATOR” to “ON” (OPTION
ª For recordings while “JET NAVIGATOR” is set to “OFF” or
recordings on another VHS
Be sure to set “JET NAVIGATOR” to “OFF” (OPTION
lpage 24).
PULL-OPEN
TIMER REC
TAPE REFRESH
AV2 IN
REC/OTR
CH
VIDEO
AUDIO
L
R
TAPE REFRESH
T A P E R E F R E S H
S T A R T : T A P E R E F R E S H
E N D : S T O P
VP31GCGCS.book 17 ページ 2 0 0 3 年 7 月 3 0 日 水曜日 午後 8 時 2 8 分