Panasonic VP-31GN - Manual (Page 21)

VHS
Operations
21
Search Functions
You can find what kind of programmes are recorded with the character and the icon indications.
1) While the Jet Navigator list appears, press [ 1].
2) Press [ 342 1] to select the desired category.
3) Press [ENTER].
This unit automatically adds special index signals on the tape when recording starts. You can find the
desired programme quickly with these signals.
..............................................................................................................................................................................................................................................................................................................................
While stopped or during normal play
Press [ : ] (backward) or [ 9] (forward).
≥Each press increases the number of skip.
¬ To cancel the Index Search or to stop playback
Press [
∫].
Notes:
≥Up to 20 index signals can be searched for in both directions.
≥When you press either one of the button too much, you can control the number of skips by pressing
the opposite button.
≥The figure on the display decreases by 1 each time an index signal is located.
≥This feature may not work correctly if the marks are too close together. Make recordings of at least 5
minutes.
¬ Index signals are recorded in the following cases.
≥When a recording is started by pressing [REC¥].
≥When [REC¥] on the remote control is pressed during recording.
≥When timer recording is activated.
You can find a timer-recorded programme with One-touch operation and play it back easily.
≥Set timer recording for the programme you wish to view.
..............................................................................................................................................................................................................................................................................................................................
Press [PROG PLAY].
≥As soon as the timer-recorded programme is found, playback starts automatically.
¬ To cancel the Easy Programme Playback
Press [
∫].
Notes:
≥The unit memorizes the position at which timer recording is set to the standby mode by pressing
[TIMER ] as the start point of Easy Programme Playback.
≥When there is no programmed timer recording data, the message “CAN NOT FIND PROG PLAY
DATA.” appears on the TV.
≥If you take out the cassette after a timer recording has finished, this function does not work.
Set the category
Category Indication Icon Category Indication Icon
MOVIE MOVIE SPORTS SPORT
MUSIC MUSIC CHILDREN CHILD
DRAMA DRAMA NEWS NEWS
EDUCATION EDUCA OTHERS OTHER
DOCUMENTARY DOCUM
END : ENTER
CATEGORY SETTING
≥ MOVIE
≥ MUSIC
≥ DRAMA
≥EDUCA
≥ DOCUM
≥ SPORT
≥ CHILD
≥ NEWS
≥ OTHER
≥ – – – – –
SELECT:
VHS Index Search System (VISS)
Easy Programme Playback
2222 2222 PROG PLAY PROG PLAY
VP31GCGCS.book 21 ページ ２ ０ ０ ３ 年 ７ 月 ３ ０ 日 水曜日 午後 ８ 時 ２ ８ 分