Pioneer FH-P9200MP - Manual (Page 53)

Note
Manufactured under license from BBE Sound,
Inc. The mark BBE is a trademark of BBE Sound,
Inc.
Recalling sound field programs
1 Press AUDIO and then press SFC to se-
lect the sound field control mode.
2Press the corresponding button to se-
lect the desired sound field program.
Button Effect
STUDIO Studio
CLUB Club
HALL Concert hall
DOME Dome
BBE BBE
# To cancel the selected sound field program,
press the same button again.
# You can also sequentially select a sound field
program by pressing c or d.
Adjusting BBE sound level
With BBE sound processing technology, you
can adjust the level of BBE.
1 Press AUDIO and SFC and then press
BBE to select BBE.
2Press BBE to turn BBE on.
# To cancel the BBE, press BBE again.
3 Press a or b to adjust the level of BBE.
Each press of a or b increases or decreases
the level of BBE.
+4 4 is displayed as the level is increased
or decreased.
Using automatic sound
levelizer
During driving, noise in the car changes ac-
cording to the driving speed and road condi-
tions. The automatic sound levelizer (ASL)
monitors such varying noise and automati-
cally increases the volume level, if this noise
becomes greater. The sensitivity (variation of
volume level to noise level) of ASL can be set
to one of five levels.
1 Press AUDIO and then press NEXT to
display ASL.
Press NEXT until ASL appears.
2Press ASL to select the automatic sound
levelizer mode.
3 Press ASL to select the desired ASL
level.
Each press of ASL selects ASL level in the fol-
lowing order:
OFF (off)Low (low)Mid-Low (mid-low)
Mid (mid)Mid-High (mid-high)High
(high)
Note
When the ASL mode is exited except for OFF is
selected, ASL appears on the basic display.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the volume level of
the FM tuner, which remains unchanged.
Audio Adjustments
En
53
English
Section
11