Storing and recalling broadcast, Frequencies 17, Tuning in strong signals 17 – Pioneer FH-P9200MP User Manual

Page 17: Storing the strongest broadcast, Storing and recalling broadcast frequencies, Tuning in strong signals, Storing the strongest broadcast frequencies, Tuner

Storing and recalling

broadcast frequencies

If you press any of the preset tuning buttons

16 you can easily store up to six broadcast

frequencies for later recall with the touch of a

button.

1 Press NEXT to display 16.

Press NEXT until 16 appears in the display.

2When you find a frequency that you

want to store in memory press a preset

tuning button 16 and hold until the preset

number stops flashing.

The number you have pressed will flash in the

preset number indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

The next time you press the same preset tun-

ing button 16 the radio station frequency is

recalled from memory.

Notes

! Up to 18 FM stations, 6 for each of the three

FM bands, and 6 AM stations can be stored in
memory.

! You can also use a and b to recall radio sta-

tion frequencies assigned to preset tuning
buttons 16.

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

1 Press FUNC and then press LOC to select

the local mode.

2Press LOC to set the local seek sensitiv-

ity.

Press LOC repeatedly to switch between the

following settings:

FM: Local OFFLevel 1Level 2Level 3

Level 4

AM: Local OFFLevel 1Level 2

The Level 4 setting allows reception of only

the strongest stations, while lower settings let

you receive progressively weaker stations.

Storing the strongest

broadcast frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under preset tuning buttons 16 and

once stored there you can tune in to those fre-

quencies with the touch of a button.

1 Press FUNC to select BSM mode.

2Press BSM to turn BSM on.

Searching appears. The six strongest broad-

cast frequencies will be stored under preset

tuning buttons 16 in order of their signal

strength.

When finished, Searching disappears and the

display switches to the preset channel list

mode.

# To cancel the storage process, press BSM
again.

Note

Storing broadcast frequencies with BSM may re-
place broadcast frequencies you have saved
using 16.

Tuner

English

Section