Playing tracks in a random order 25, Scanning folders and tracks 25, Pausing mp3/wma playback 25 – Pioneer FH-P9200MP User Manual

Page 25: Playing tracks in a random order, Scanning folders and tracks, Pausing mp3/wma playback, Mp3/wma player

2Press RPT to select the repeat range.

Press RPT until the desired repeat range ap-

pears in the display.

! Folder repeat Repeat the current folder
! Track repeat Repeat just the current

track

! Disc repeat Repeat all tracks

Notes

! If you select other folder during repeat play,

the repeat play range changes to Disc repeat.

! If you perform track search or fast forward/re-

verse during Track repeat, the repeat play
range changes to Folder repeat.

! When Folder repeat is selected, it is not pos-

sible to play back a subfolder of that folder.

! When the repeat mode is exited, either T.RPT

(one-track repeat) or FOLDER PRT (folder re-
peat) may appear on the basic display.

Playing tracks in a random

order

Random play lets you play back tracks in a

random order within the repeat range,

Folder repeat and Disc repeat.

1 Select the repeat range.

Refer to Repeating play on the previous page.

2Press FUNC and then press RDM to se-

lect the random mode.

3 Press RDM to turn random play on.

The light illuminates. Tracks will play in a ran-

dom order within the previously selected

Folder repeat or Disc repeat ranges.

# To turn random play off, press RDM again.

Note

When the random mode is exited while random
play is on, RDM appears on the basic display.

Scanning folders and tracks

While you are using Folder repeat, the begin-

ning of each track in the selected folder plays

for about 10 seconds. When you are using

Disc repeat, the beginning of the first track of

each folder is played for about 10 seconds.

1 Select the repeat range.

Refer to Repeating play on the previous page.

2Press FUNC and then press SCAN to se-

lect the scan mode.

3 Press SCAN to turn scan play on.

The light illuminates. The first 10 seconds of

each track of the current folder (or the first

track of each folder) is played.

4 When you find the desired track (or

folder) press SCAN to turn scan play off.

The light goes off. The track (or folder) will con-

tinue to play.

# If the scan mode is automatically canceled,
select the scan mode again.

Notes

! After track or folder scanning is finished, nor-

mal playback of the tracks will begin again.

! When the scan mode is exited while scan play

is on, SCAN appears on the basic display.

Pausing MP3/WMA playback

Pause lets you temporarily stop playback of

the MP3/WMA.

MP3/WMA Player

English

Section