Pioneer FH-P9200MP - Manual (Page 35)

2Press NEXT to switch between 16 and
712.
3 Press any of the buttons 16 (or 712)
to select the desired disc title.
That selection will begin to play.
Notes
! You can also use c, d and a to select and
play the desired disc title.
! If no title has been entered for a disc,
No D.Title will be displayed.
! No disc is displayed next to the disc number
when no disc is set in the magazine.
! You cannot display 712 when a 6-disc multi-
CD player is connected.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
1 Press FUNC and then press PAUSE to se-
lect the pause mode.
2Press PAUSE to turn pause on.
The light illuminates. Play of the current track
pauses.
# To turn the pause off, press PAUSE again.
Note
You can also turn pause on or off by pressing
PAUSE in the following display.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and playback up to 99
tracks per disc, up to 100 discs (with the disc
title). (With multi-CD players sold before the
CDX-P1250 and CDX-P650, up to 24 tracks can
be stored in the playlist.)
1 Play a CD that you want to program.
Press a or b to select a CD.
2Press FUNC and NEXT and then press
ITS.M to select the ITS programming mode.
3 Select a desired track by pressing c or
d.
4 Press MEMO to store the currently play-
ing track in the playlist.
Memory complete is displayed briefly and
the currently playing selection is added to your
playlist.
# You can also use a to store the currently play-
ing track in the playlist.
5 Press BAND to return to the playback
display.
Note
After data for 100 discs has been stored in mem-
ory, data for a new disc will overwrite the oldest
one.
Multi-CD Player
En
35
English
Section
08