Pioneer FH-P9200MP - Manual (Page 42)

(When you select the disc title input mode
(TTLin) or ITS programming mode (ITS.M),
the display is not returned automatically.)
! D.LIST, TTLin, ITS.P and ITS.M are displayed
only when using a multi-DVD player.
Repeating play
1 Press FUNC to select the repeat mode.
2Press RPT to select the repeat range.
During DVD video playback
! Title repeat Repeat just the current title
! Chapter repeat Repeat just the current
chapter
! Disc repeat Repeat the current disc
During Video CD or CD playback
Each press of RPT turns the repeat play on or
off.
Playing tracks in a random
order
1 Press FUNC and then press RDM to se-
lect the random mode.
2Press RDM to turn random play on.
The light illuminates. Tracks will play in a ran-
dom order.
# To turn random play off, press RDM again.
Note
When the random mode is exited while random
play is on, RDM appears on the basic display.
Scanning tracks of a CD
1 Press FUNC and then press SCAN to se-
lect the scan mode.
2Press SCAN to turn scan play on.
The light illuminates. The first 10 seconds of
each track is played.
3 When you find the desired track press
SCAN to turn scan play off.
The light goes off. The track will continue to
play.
# If the scan mode is automatically canceled,
select the scan mode again.
Notes
! After scanning of a CD is finished, normal
playback of the tracks will begin again.
! When the scan mode is exited while scan play
is on, SCAN appears on the basic display.
Pausing disc playback
1 Press FUNC and then press PAUSE to se-
lect the pause mode.
2Press PAUSE to turn pause on.
The light illuminates. Play of the current track
pauses.
# To turn the pause off, press PAUSE again.
Note
You can also turn pause on or off by pressing
PAUSE in the following display.
Using ITS playlist, disc title
input and disc title list
functions
During CD playback when using this unit with
multi-DVD player, you can use these functions.
Operation is same as multi-CD player. Please
refer to multi-CD player section.
DVD Player
En
42
Section
10