Pioneer FH-P9200MP - Manual (Page 15)

Turning the unit on
% Rotate SOURCE on the head unit to
turn the unit on.
When you select a source the unit is turned
on.
# When using the remote control, press
SOURCE to turn the unit on.
Selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a CD
in this unit (refer to page 19). To switch to the
built-in MD player, load an MD in this unit
(refer to page 28).
% Rotate SOURCE on the head unit to se-
lect a source.
Rotate SOURCE repeatedly to switch between
the following sources:
TunerTelevisionDVD player/Multi-DVD
playerBuilt-in CD playerMulti-CD
playerBuilt-in MD playerExternal unit
1External unit 2AUXSources off
# When using the remote control, press
SOURCE repeatedly.
Notes
! In the following cases, the sound source will
not change:
When a unit corresponding to each source
is not connected to this unit.
When no disc is set in this unit.
When no disc is set in the DVD player.
When no magazine is set in the multi-CD
player.
When no magazine is set in the multi-DVD
player.
When the AUX (auxiliary input) is set to off
(refer to page 57).
! External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
! When this units blue lead is connected to the
cars auto-antenna relay control terminal, the
cars antenna extends when this units se-
lected source is the tuner. To retract the anten-
na, switch to a source other than tuner.
Turning the unit off
% Rotate SOURCE on the head unit until
the unit turns off.
When using the remote control, press
SOURCE and hold until the unit turns off.
Power ON/OFF
En
15
English
Section
03