Pioneer FH-P9200MP - Manual (Page 39)

Using the TV tuner
1 2
3
FORM1
You can use this unit to control a TV tuner,
which is sold separately.
For details concerning operation, refer to the
TV tuners operation manuals. This section
provides information on TV operations with
this unit which differs from that described in
the TV tuners operation manual.
1 Band indicator
Shows which band the TV tuner is tuned to.
2 Preset number indicator
Shows what preset has been selected.
3 Channel indicator
Shows which channel the TV tuner is tuned.
1 Rotate SOURCE to select the television.
Rotate SOURCE until you see Television dis-
played.
2Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Press BAND to select a band.
Press BAND until the desired band is dis-
played, TV-1 or TV-2.
4 To perform manual tuning, press c or
d with quick presses.
The channels move up or down step by step.
5 To perform seek tuning, press and hold
c or d for about one second and release.
# You can cancel seek tuning by pressing either
c or d with a quick press.
Introduction of advanced
TV tuner operation
The tuner function menu has the following
functions:
BSSM (best stations sequential memory)
chLIST (preset channel list)
1 BSSM (best stations sequential mem-
ory)
Press BSSM repeatedly to turn BSSM on or
off.
When finished, the display switches to the
preset channel list mode.
2 chLIST (preset channel list)
For operation of the preset channel list, refer
to Selecting channels from the preset chan-
nel list on the next page.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned.
Storing and recalling
broadcast stations
If you press any of the preset tuning buttons
16 (or 712) you can easily store up to 12
broadcast stations for later recall with the
touch of a button.
TV tuner
En
39
English
Section
09