Pioneer FH-P9200MP - Manual (Page 12)

! If you have to operate this unit unavoidably
when driving, look ahead carefully to avoid the
risk of being involved in a traffic accident.
! If any of the following troubles occur, immedi-
ately stop using this unit and consult with the
dealer from whom you purchased it:
the unit is smoking.
the unit is emitting abnormal odor.
a foreign object has entered the unit.
liquid has been spilled on or into the unit.
If you continue to use this unit without finding
a remedy, the unit may be damaged badly, re-
sulting in a serious accident or fire.
! Do not leave this unit free (unattached) inside
the car. When the car stops or turns a curve,
the unit might drop on the floor. If the unit
rolls under the brake pedal, it might prevent
the driver from braking well, causing serious
trouble. Be sure to fix this unit to the steering
wheel.
! Do not disassemble or modify this unit. To do
so may cause a fault.
FUNCTION button and AUDIO button
Operation of the FUNCTION button and the
AUDIO button on the remote control differs
from the operation of the FUNC button and
the AUDIO button on the head unit. When op-
erating the head unit, use the FUNC button
and the AUDIO button to select the appropri-
ate menu, then use the multi-function buttons
to select the mode. When operating the re-
mote control, however, switch through the
modes as described below to select the mode.
FUNCTION button operation
% Press FUNCTION to select the desired
mode (e.g., built-in CD player).
Press FUNCTION repeatedly to switch be-
tween the following modes:
RPTRDMSCANT.LISTPAUSETTLin
R.SRCHT.READ
Note
Refer to Introduction of advanced built-in CD
player operation on page 20.
AUDIO button operation
% Press AUDIO to select the desired
mode.
Press AUDIO repeatedly to switch between
the following modes:
BALNWPOSIT.ALEQ 1EQ 2BBE
LOUDASLSLA
F/BLOUDSFCEQ 1EQ 2ASLPOSI
T.ALA.EQSW1SW2HPF FHPF R
SLA
Note
Refer to Introduction of audio adjustments on
page 44.
Before You Start
En
12
Section
01