Philips cSmart Series - Manual (Page 18)

Mirror
The projector can be used in various positions with respect to
the viewers and the projection screen. With the Mirror function
the picture can be displayed in a way that is suitable for your
specific application.
Front projection
Rear projection
Ceiling front projection
Ceiling rear projection
Audio Control
The projector’s sound is set to standard specifications at the
factory. However, you can adjust the sound to suit your own
preferences by using the Audio control feature.
The following adjustments can be made:
–
Volume – adjusts the sound level;
– Bass – adjusts the bass tones;
– Treble – adjusts the high tones;
– Mute – mutes the sound of the projector (or an externally
connected loudspeaker);
– Audio out – switches between fixed (‘Line’) and variable
(‘Regulated’) volume on the audio output (Audio out).
1. Select the required input (Data, Video or S-Video).
2. Press Menu.
–
The menu bar appears on the screen.
3. Use Cursor Control to select Audio in the menu bar.
4. Use Cursor Control to select the item to be adjusted.
5. Use Cursor Control to make the required adjustment in the
action window.
6. If required, select the next item to be adjusted or press
Menu to exit.
Note: The volume can also be adjusted with the – Volume + keys
on the remote control.
Caution!
Always reduce/check the volume setting of connected amplifiers
before switching off (A/V) mute, to prevent damage to speakers.
SCREEN
SCREEN
SCREEN
SCREEN
8. Operation
18
Display and picture control/Audio control