Philips cSmart Series - Manual (Page 14)

Connecting to audio equipment
Note: The characters in brackets (a) correspond to the
characters in fig. 2 of ‘Controls and connections’.
Caution!
Always switch off the projector before making any connections.
Always turn down the volume control of the connected amplifier
before switching it on, to prevent damage to the speakers.
• Connect the Audio in L/R sockets of an amplifier or stereo
system to the Audio out socket
(a) of the projector.
For this use audio/video connection cable (2) supplied.
You can select fixed (‘Line’) or variable (‘Regulated’) volume
output in the ‘Audio’ menu.
Connecting to an external monitor
Note: The characters in brackets (a) correspond to characters in
fig. 2 of ‘Controls and connections’.
Caution!
Always switch off PC, external monitor and projector before
making any connections.
• Connect the Data out terminal (g) of the projector to the
external monitor and secure the plugs by tightening the
thumb screws.
For this, use the monitor cable supplied with the monitor.
To obtain the audio signal on the monitor instead of on the
projector:
•
Connect the Audio in sockets of the monitor to the Audio out
socket
(a) of the projector, using the audio/video connection
cable (2) supplied.
Notes:
– One external monitor or projector can be connected at a time.
– For further details on the operation with On Screen Displays
see chapter ‘8. Operation’.
Monitor cable
Audio out USB Video S-Video Audio out USB Video S-Video Data out Data out Video audio-in Video audio-in Data audio-in Data audio-in
(2)
(a) (g)
Projector
Amplifier
L Audio R
in
L Audio R
in
Audio out USB Video S-Video Audio out USB Video S-Video Data out Data out video audio-in Video audio-in Data audio-in Data audio-in
(2)
(a)
7. Installation Connecting to audio equipment/external monitor
14